.:: Classic Polymers & Resins ::.

PRODUCT DATA SHEET

PROPERTY	UNITS	TEST METHOD	PA 6	PA 6M MoS2	PA XLU Oilon	UHMW	POLY ACETAL	PP	PTFE
Specific Gravity	-	ASTM D792	1.16	1.17	1.15	0.935	1.4	0.9	2.2
Tensile Strength	psi	ASTM D638	12000 – 13000	12000 – 13500	9500 – 11000	3100	9500	4800	3900
Tensile Elongation	%	ASTM D638	20 - 45	20 – 45	45 – 55	_______	30	12	300
Tensile Modulus	psi	ASTM D638	485000- 550000	485000- 55000	485000- 550000	125000	400000	195000	80000
Compressive Strength (@ 10% Offset)	psi	ASTM D695	15500 – 18000	15500 – 18000	12000 – 14000	2000	15000	7000	3500
Compressive Modulus	psi	ASTM D695	300000- 350000	300000- 350000	275000- 375000	______	400000	________	70000
Flexural Strength	psi	ASTM D790	15500 – 17500	15500 – 17500	14000 – 16000	______	12000	7000	No Break
Flexural Modulus	psi	ASTM D790	420000- 500000	420000- 500000	375000- 475000	125000	400000	180000	72000
Shear Strength	psi	ASTM D732	10000 – 11000	10000 - 11000	8000 – 9000	______	________	________	_______
Hardness- Shore ‘D’	D	ASTM D2240	80 – 85	82 – 85	78 – 83	62 – 66	88 – 93	60 – 65	50
Melting Point	Deg C	ASTM D789	230	240	220	--------	168	164	335
Coefficient of Linear Thermal Expansion	in./in./DegF	ASTM D696	5.0 x 10-5	5.0 x 10-5	3.5 x 10-5	11.1 x 10-5	5.4 x 10-5	6.2 x 10-5	7.5 x 10-5
Deformation under Load	%	ASTM D621	0.5 – 2.5	0.5 – 2.5	0.5 – 3.0	______	_______	_______	_______
Deflection Temp. 264 psi 66 psi	Deg C Deg C	ASTM D648	149-218 204-218	149-218 204-218	149-218 204-218	---- 95	104 ------	52 -----	55 -----
Continuous Service Temp. in Air	Deg C	-	120	130	110	82	82	75	220
Intermittent Service Temp.	Deg C	-	160	170	160	-----	-------	82	260
Dielectric Constant @ 60 Cycles @ 1000 Cycles @ 100000 Cycles	------ ------ ------	ASTM D150	3.7 3.7 3.7	3.7 3.7 3.7	______ ______ ______	2.3 ______ ---------	------- 3.8 _____	--------- 2.25 _______	--------- 2.1 _______
Tensile Impact	ft. lbs./in2	ASTM D1822	_____	______	33 - 36	______	_______	_______	________
Coefficient of friction Static Dynamic	_______	_______	______	______	0.19-0.22	0.11-0.12	_______	________	________

This information is presented as a guide for material. Classic Polymers & Resins makes no expressed or implied warranty for materials selected solely on the basis of the information contained herein

NOTE : INFORMATION ON OTHER MATERIALS AND MODIFIED GRADES IS AVAILABLE ON REQUEST. MAIL US AT :info@classicpolymers.co.in

Top